Product classification

HS code for Mechanical pulp paper sheets: 4802.62

Uncoated paper and paperboard (not 4801 or 4803), over 10% by weight of mechanical or chemi-mechanical processed fibre, in sheets 435mm or less by 297mm or less (unfolded).

Classification of mechanical pulp paper sheets under HS 4802.62

Mechanical pulp paper in sheets with specific dimensions is classified under HS code 4802.62. Similar to its roll-form counterpart, this paper must contain more than 10% by weight of fibers obtained by a mechanical or chemi-mechanical process. However, 4802.62 is restricted to paper presented in rectangular (including square) sheets with one side not exceeding 435 mm and the other side not exceeding 297 mm in the unfolded state. This essentially covers A3 size or smaller. The classification is highly specific to the size of the sheet at the time of import. The mechanical fiber content is a technical requirement that often requires laboratory analysis to confirm, as it affects the tariff rate and trade statistics. This paper is typically used for office stationery, small-scale printing, and certain types of drawing paper. The classification follows GRI 1 and 6, focusing on the material composition and the dimensions specified in the subheading text. If the paper is uncoated and used for graphic purposes but contains mechanical pulp, it must be placed here if it meets the size criteria.

Covers
  • A4 mechanical pulp printing paper
  • A3 mechanical pulp sheets
  • Small format uncoated mechanical paper
  • Office paper containing >10% mechanical fiber
  • Mechanical pulp drawing paper in small sheets
Also under 4802.62
  • Navigator A4 Paper
  • HP Everyday Printing Paper
  • Double A A4
  • Mondi Rotatrim A4

Codes often confused with 4802.62

Common mistake. The most common misclassification is with HS code 4802.61, which is for the same paper in rolls. Another frequent error is 4802.69, which covers mechanical pulp paper in sheets where at least one side exceeds the 435 mm or 297 mm limit. Additionally, if the paper is cut to a shape other than rectangular or square, or if it is further processed into stationery like envelopes, it may fall under 4817 or 4823.

4802.61Uncoated paper and paperboard (not 4801 or 4803); over 10% by weight of mechanical or chemi-mechanical processed fibre, in rolls4802.69Uncoated paper and paperboard (not 4801 or 4803); over 10% by weight of mechanical or chemi-mechanical processed fibre, other than rolls, other than sheets 435mm or less by 297mm or less (unfolded)48.17Envelopes, letter cards, plain postcards and correspondence cards, of paper, paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard containing assortment of paper stationery48.23Paper, paperboard, cellulose wadding and webs of cellulose fibres; cut to size or shape, articles of paper pulp, paper and paper-board, cellulose wadding or webs of cellulose fibres, n.e.c. in chapter 48

Top exporters and importers of HS 480262 (the code used for mechanical pulp paper sheets), 2025

In 2025, the largest exporter of HS 480262 (the code used for mechanical pulp paper sheets) in UN Comtrade data was Germany, with 44% of world exports; the largest importer in UN Comtrade data was China, with 20% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.

Figures cover everything classified under HS 480262, not only mechanical pulp paper sheets.

Top exporters 2025 · share of world exports

  1. 1 Germany $78M
  2. 2 China $48M
  3. 3 United States $9.3M

World total: $179M Reported figures on UN Comtrade ↗

Top importers 2025 · share of world imports

  1. 1 China $51M
  2. 2 Saudi Arabia $31M
  3. 3 United Kingdom $21M

World total: $255M Reported figures on UN Comtrade ↗

How these figures are built

109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).

Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.

Brazil NCM codes for mechanical pulp paper sheets

Brazil splits HS 4802.62 into 4 NCM codes. Pick the one that matches your product:

  • 4802.62.10Paper over 10% mech. fibre, sheets up to 360 mm
  • 4802.62.91Small sheets, max 57 g/m², min 65% mech. wood
  • 4802.62.92Kraft paper over 10% mech. fibre, small sheets
  • 4802.62.99Other paper over 10% mech. fibre, small sheets

Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.

EU Regulatory Requirements

This product category is subject to the EU Deforestation Regulation (EUDR). Importers must provide due diligence statements proving the product was not produced on deforested land after December 31, 2020.

This product is covered by the EU Timber Regulation (EUTR), requiring operators to exercise due diligence to minimize the risk of placing illegally harvested timber on the EU market.

Questions about mechanical pulp paper sheets

What is the HS code for Mechanical pulp paper sheets?

The HS code for Mechanical pulp paper sheets is 480262 (Uncoated paper and paperboard (not 4801 or 4803); over 10% by weight of mechanical or chemi-mechanical processed fibre, in sheets 435mm or less by 297mm or less (unfolded)). The HS code for uncoated mechanical pulp paper in sheets (435mm x 297mm or less) is 4802.62.

How do I classify Mechanical pulp paper sheets for customs?

Mechanical pulp paper sheets is classified under HS code 480262 — Uncoated paper and paperboard (not 4801 or 4803); over 10% by weight of mechanical or chemi-mechanical processed fibre, in sheets 435mm or less by 297mm or less (unfolded). This is a 6-digit subheading level code.

What if the sheets are larger than A3 size?

If the sheets have one side exceeding 435 mm or the other side exceeding 297 mm, they should be classified under HS code 4802.69.

Which countries are the top exporters of mechanical pulp paper sheets (HS 480262)?

In 2025, the top exporters of HS 480262 (the code used for mechanical pulp paper sheets) in UN Comtrade data were Germany ($78M, 44% of world exports), China ($48M) and the United States ($9.3M). World exports came to about $179M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.

Which countries are the top importers of mechanical pulp paper sheets (HS 480262)?

In 2025, the top importers of HS 480262 (the code used for mechanical pulp paper sheets) in UN Comtrade data were China ($51M, 20% of world imports), Saudi Arabia ($31M) and the United Kingdom ($21M). World imports came to about $255M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.

Is the HS code for Mechanical pulp paper sheets the same in all countries?

The base HS code 480262 for Mechanical pulp paper sheets is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.

What is the NCM code for mechanical pulp paper sheets in Brazil?

Brazil splits HS 480262 into 4 NCM codes, so the right one for mechanical pulp paper sheets depends on the product's details: 4802.62.10 (Paper over 10% mech. fibre, sheets up to 360 mm), 4802.62.91 (Small sheets, max 57 g/m², min 65% mech. wood), 4802.62.92 (Kraft paper over 10% mech. fibre, small sheets), 4802.62.99 (Other paper over 10% mech. fibre, small sheets).