Product classification
HS code for Battenboard: 4412.59
Blockboard, laminboard and battenboard, with both outer plies of coniferous wood.
Classification of battenboard under HS 4412.59
Battenboard is classified under HS code 4412.59 based on its specific multi-layered construction and the botanical species of its outer veneers. Chapter 44 of the Harmonized System covers wood and articles of wood, with heading 4412 dedicated to plywood, veneered panels, and similar laminated wood. Battenboard is a type of core-board where the central layer consists of wooden battens (strips of wood) that are glued together to form a solid core. This core is then sandwiched between two outer plies of wood veneer. The sub-heading 4412.59 is applied when both outer plies are made of coniferous wood, such as pine, spruce, or fir. This classification follows GRI 1 and GRI 6, identifying the product by its internal structural characteristics and the classification of its surface layers. The presence of the batten core distinguishes it from standard plywood, which is made of multiple thin cross-laminated sheets, and from blockboard, which utilizes wider blocks in the core.
- Covers
- Battenboard with pine outer plies
- Coniferous-faced laminboard
- Softwood-veneered batten-core panels
- Structural battenboard for interior joinery
- Laminated panels with a core of softwood strips
- Also under 4412.59
- Egger blockboard
- Kronospan laminboard
- UPM Plywood blockboard
- Stora Enso wood panels
Codes often confused with 4412.59
Common mistake. Battenboard is often misclassified under 4412.31 or 4412.33, which are codes reserved for standard plywood consisting solely of sheets of wood. It is also sometimes incorrectly filed under 4418.99, which covers builders' joinery and carpentry; however, heading 4412 is more specific for the manufactured panel itself. If the outer plies are made of non-coniferous wood (hardwood), the product must be classified under 4412.51 or 4412.52 instead of 4412.59.
Top exporters and importers of HS 441259 (the code used for battenboard), 2025
In 2025, the largest exporter of HS 441259 (the code used for battenboard) in UN Comtrade data was Austria, with 40% of world exports; the largest importer in UN Comtrade data was Switzerland, with 33% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 441259, not only battenboard.
Top exporters 2025 · share of world exports
- 1 Austria $285M 40% of world exports
- 2 Czechia $106M 15% of world exports
- 3 Slovakia $83M 12% of world exports
World total: $718M Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 Switzerland $186M 33% of world imports
- 2 Italy $91M 16% of world imports
- 3 Germany $87M 15% of world imports
World total: $569M Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for battenboard
Brazil classifies battenboard under NCM 4412.59.00: HS 4412.59 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
EU Regulatory Requirements
This product category is subject to the EU Deforestation Regulation (EUDR). Importers must provide due diligence statements proving the product was not produced on deforested land after December 31, 2020.
This product is covered by the EU Timber Regulation (EUTR), requiring operators to exercise due diligence to minimize the risk of placing illegally harvested timber on the EU market.
Questions about battenboard
What is the HS code for Battenboard?
The HS code for Battenboard is 441259 (Blockboard, laminboard and battenboard; with both outer plies of coniferous wood). The HS code for battenboard with coniferous outer plies is 4412.59.
How do I classify Battenboard for customs?
Battenboard is classified under HS code 441259 — Blockboard, laminboard and battenboard; with both outer plies of coniferous wood. This is a 6-digit subheading level code.
What is the difference between battenboard and blockboard?
While both are core-boards, battenboard has a core made of narrow strips (battens), whereas blockboard has a core made of wider blocks of wood.
Which countries are the top exporters of battenboard (HS 441259)?
In 2025, the top exporters of HS 441259 (the code used for battenboard) in UN Comtrade data were Austria ($285M, 40% of world exports), Czechia ($106M) and Slovakia ($83M). World exports came to about $718M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of battenboard (HS 441259)?
In 2025, the top importers of HS 441259 (the code used for battenboard) in UN Comtrade data were Switzerland ($186M, 33% of world imports), Italy ($91M) and Germany ($87M). World imports came to about $569M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Battenboard the same in all countries?
The base HS code 441259 for Battenboard is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for battenboard in Brazil?
In Brazil, battenboard (HS 441259) is classified under NCM 4412.59.00.