Product classification
HS code for Bamboo veneered panels: 4412.10
Plywood, veneered panels and similar laminated wood, of bamboo.
Classification of bamboo veneered panels under HS 4412.10
Bamboo veneered panels are classified under HS code 4412.10. This classification is governed by the General Rules of Interpretation (GRI), specifically GRI 1 and 6, which dictate that classification is determined by the terms of the headings and subheadings. Heading 4412 covers plywood, veneered panels, and similar laminated wood. The inclusion of bamboo in this heading is significant because, although bamboo is botanically a grass, the Harmonized System treats it as wood for the purposes of Chapter 44. Subheading 4412.10 is specifically reserved for products made of bamboo. These panels typically consist of a core made of particle board, fiberboard, or inferior wood layers, which are then covered with a thin decorative layer (veneer) of bamboo. The manufacturing process involves high-pressure bonding with adhesives, ensuring the panel functions as a single structural unit. This classification is essential for customs because it distinguishes processed bamboo construction materials from raw bamboo or simple bamboo mats. The technical requirement for this code is that at least one outer ply must be bamboo, or the product must be a "similar laminated wood" where bamboo is the primary component of the lamination. Furthermore, the panels must be intended for use in construction, furniture making, or interior design, where the structural integrity of the lamination is a key feature. The classification also accounts for the environmental and trade regulations surrounding bamboo as a sustainable alternative to traditional hardwoods.
- Covers
- Bamboo-faced plywood
- Decorative bamboo veneered MDF
- Multi-layered bamboo flooring blanks
- Bamboo-veneered particle board
- Architectural bamboo panels for cabinetry
- Also under 4412.10
- Cali Bamboo flooring
- Teragren bamboo panels
- Moso Bamboo products
- Plyboo bamboo plywood
Codes often confused with 4412.10
Common mistake. These panels are often confused with HS code 4409.21, which covers bamboo that is continuously shaped (tongued, grooved, etc.) but is generally solid. Another common error is using 4418.73, which is specifically for assembled flooring panels. The distinction is that 4412.10 focuses on the laminated or veneered nature of the panel rather than its final use as flooring or its edge-shaping.
Top exporters and importers of HS 441210 (the code used for bamboo veneered panels), 2025
In 2025, the largest exporter of HS 441210 (the code used for bamboo veneered panels) in UN Comtrade data was China, with 65% of world exports; the largest importer in UN Comtrade data was Saudi Arabia, with 43% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 441210, not only bamboo veneered panels.
Top exporters 2025 · share of world exports
- 1 China $53M 65% of world exports
- 2 Russia* ~$6.6M 8.0% of world exports · partner records ↗
- 3 Netherlands $3.7M 4.5% of world exports
World total: $82M Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 Saudi Arabia $68M 43% of world imports
- 2 United States $11M 6.9% of world imports
- 3 Japan $10M 6.3% of world imports
World total: $159M Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries marked * did not, so their figures add up what other countries recorded trading with them, and their exports are valued at buyers' CIF prices. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for bamboo veneered panels
Brazil classifies bamboo veneered panels under NCM 4412.10.00: HS 4412.10 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
EU Regulatory Requirements
This product category is subject to the EU Deforestation Regulation (EUDR). Importers must provide due diligence statements proving the product was not produced on deforested land after December 31, 2020.
This product is covered by the EU Timber Regulation (EUTR), requiring operators to exercise due diligence to minimize the risk of placing illegally harvested timber on the EU market.
Questions about bamboo veneered panels
What is the HS code for Bamboo veneered panels?
The HS code for Bamboo veneered panels is 441210 (Plywood, veneered panels and similar laminated wood; of bamboo). The HS code is 4412.10.
How do I classify Bamboo veneered panels for customs?
Bamboo veneered panels is classified under HS code 441210 — Plywood, veneered panels and similar laminated wood; of bamboo. This is a 6-digit subheading level code.
Does this code include solid bamboo boards?
No, solid bamboo boards that are not laminated or veneered are typically classified under heading 4409.
Which countries are the top exporters of bamboo veneered panels (HS 441210)?
In 2025, the top exporters of HS 441210 (the code used for bamboo veneered panels) in UN Comtrade data were China ($53M, 65% of world exports), Russia (about $6.6M) and the Netherlands ($3.7M). World exports came to about $82M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of bamboo veneered panels (HS 441210)?
In 2025, the top importers of HS 441210 (the code used for bamboo veneered panels) in UN Comtrade data were Saudi Arabia ($68M, 43% of world imports), the United States ($11M) and Japan ($10M). World imports came to about $159M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Bamboo veneered panels the same in all countries?
The base HS code 441210 for Bamboo veneered panels is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for bamboo veneered panels in Brazil?
In Brazil, bamboo veneered panels (HS 441210) is classified under NCM 4412.10.00.