Product classification
HS code for Push mower: 8433.19
Mowers, for lawns, parks or sports-grounds, other than with the cutting device rotating in a horizontal plane.
Classification of push mower under HS 8433.19
The classification of a push mower under HS code 8433.19 is determined by the Harmonized System's hierarchical structure for agricultural and horticultural machinery. Chapter 84 encompasses nuclear reactors, boilers, machinery, and mechanical appliances. Within this chapter, heading 8433 is designated for harvesting or threshing machinery, including grass or hay mowers. The classification further narrows down based on the specific application and mechanical design of the equipment. Subheading 8433.19 is specifically reserved for mowers designed for lawns, parks, or sports grounds that do not utilize a cutting device rotating in a horizontal plane. This distinction is critical because mowers with horizontal rotating blades, such as standard rotary mowers, are classified under 8433.11. Push mowers falling under 8433.19 typically utilize a cylindrical or reel-type cutting mechanism where the blades rotate around a horizontal axis or are manually propelled without a motor. The classification follows General Interpretative Rule (GRI) 1 and 6, which dictate that classification is determined by the terms of the headings and any relative section or chapter notes. Importers must ensure the cutting mechanism is correctly identified, as the distinction between a rotary blade and a reel blade is the primary factor in choosing between 8433.11 and 8433.19. Furthermore, if the mower is not intended for lawns or sports grounds, it may fall under 8433.20, which covers other types of mowers.
- Covers
- Manual reel mowers
- Cylinder mowers for golf courses
- Hand-operated push mowers without motors
- Non-rotary lawn mowers for residential use
- Pedestrian-controlled reel mowers
- Also under 8433.19
- Toro Greensmaster
- John Deere 2500B
- Allett C34
- McLane 25-7RP
- Fiskars StaySharp Max
Codes often confused with 8433.19
Common mistake. The most frequent misclassification occurs with HS code 8433.11. This code is specifically for mowers with a cutting device rotating in a horizontal plane (rotary mowers). Many users assume all lawn mowers belong together, but the mechanical action of the blade is the deciding factor. Additionally, motorized mowers that are self-propelled but still pushed by an operator are sometimes confused with 8433.20, which is reserved for larger agricultural mowers.
Top exporters and importers of HS 843319 (the code used for push mower), 2025
In 2025, the largest exporter of HS 843319 (the code used for push mower) in UN Comtrade data was China, with 51% of world exports; the largest importer in UN Comtrade data was the United States, with 13% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 843319, not only push mower.
Top exporters 2025 · share of world exports
- 1 China $364M 51% of world exports
- 2 United States $141M 20% of world exports
- 3 United Kingdom $43M 6.1% of world exports
World total: $712M Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 United States $78M 13% of world imports
- 2 United Kingdom $56M 9.0% of world imports
- 3 Germany $48M 7.8% of world imports
World total: $622M Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for push mower
Brazil classifies push mower under NCM 8433.19.00: HS 8433.19 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
Questions about push mower
What is the HS code for Push mower?
The HS code for Push mower is 843319 (Mowers; for lawns, parks or sports-grounds, other than with the cutting device rotating in a horizontal plane). The HS code for a push mower with a non-horizontal cutting mechanism (like a reel or cylinder mower) is 8433.19.
How do I classify Push mower for customs?
Push mower is classified under HS code 843319 — Mowers; for lawns, parks or sports-grounds, other than with the cutting device rotating in a horizontal plane. This is a 6-digit subheading level code.
Does the presence of a motor change the classification?
Not necessarily; the primary distinction for 8433.19 is the orientation of the cutting device (non-horizontal) rather than the power source, though most manual push mowers fall here.
Which countries are the top exporters of push mower (HS 843319)?
In 2025, the top exporters of HS 843319 (the code used for push mower) in UN Comtrade data were China ($364M, 51% of world exports), the United States ($141M) and the United Kingdom ($43M). World exports came to about $712M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of push mower (HS 843319)?
In 2025, the top importers of HS 843319 (the code used for push mower) in UN Comtrade data were the United States ($78M, 13% of world imports), the United Kingdom ($56M) and Germany ($48M). World imports came to about $622M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Push mower the same in all countries?
The base HS code 843319 for Push mower is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for push mower in Brazil?
In Brazil, push mower (HS 843319) is classified under NCM 8433.19.00.