Product classification
HS code for Plastic baler twine: 5607.41
Twine, binder or baler twine, of polyethylene or polypropylene.
Classification of plastic baler twine under HS 5607.41
Plastic baler twine is classified under HS code 5607.41 because it is a product of synthetic fibers, specifically polyethylene or polypropylene, manufactured into twine, cordage, or rope. According to the General Rules of Interpretation (GRI) 1 and 6, classification is determined by the terms of the headings and any relative section or chapter notes. Chapter 56 covers wadding, felt, and nonwovens, as well as special yarns, twine, cordage, and ropes. Heading 5607 specifically addresses twine and cordage, whether or not plaited or braided and whether or not impregnated, coated, covered, or sheathed with rubber or plastics. Subheading 5607.41 is reserved for binder or baler twine made of polyethylene or polypropylene, which are the primary materials used in agricultural baling processes due to their high tensile strength and resistance to environmental degradation. The classification is further supported by the fact that these twines are typically high-tenacity and designed for heavy-duty mechanical use in baling machines. The material must be of a certain decitex to be considered twine rather than yarn, and for this specific code, it must be intended for agricultural binding or baling.
- Covers
- Polypropylene baler twine
- Polyethylene binder twine
- Heavy-duty agricultural twine
- High-tensile plastic cordage for hay baling
- UV-stabilized plastic twine for outdoor use
- Also under 5607.41
- Tama (baler twine)
- Piippo (twine manufacturer)
- Bridon-Bekaert (ropes and twines)
- John Deere (agricultural equipment, uses twine)
Codes often confused with 5607.41
Common mistake. This product is commonly confused with 5607.49, which covers other twines of polyethylene or polypropylene that are not specifically for binding or baling. It is also often confused with 5607.50, which covers twine made from other synthetic fibers like nylon or polyester. Another frequent error is classifying it under 3926.90 as a general plastic article, but Chapter 39 Note 2(p) excludes goods of Section XI (textiles and textile articles), and twine is considered a textile product under Chapter 56.
Top exporters and importers of HS 560741 (the code used for plastic baler twine), 2025
In 2025, the largest exporter of HS 560741 (the code used for plastic baler twine) in UN Comtrade data was Portugal, with 41% of world exports; the largest importer in UN Comtrade data was the United States, with 17% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 560741, not only plastic baler twine.
Top exporters 2025 · share of world exports
- 1 Portugal $123M 41% of world exports
- 2 China $34M 11% of world exports
- 3 Hungary $33M 11% of world exports
World total: $303M Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 United States $46M 17% of world imports
- 2 France $23M 8.5% of world imports
- 3 Germany $20M 7.3% of world imports
World total: $269M Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for plastic baler twine
Brazil classifies plastic baler twine under NCM 5607.41.00: HS 5607.41 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
Questions about plastic baler twine
What is the HS code for Plastic baler twine?
The HS code for Plastic baler twine is 560741 (Twine; binder or baler twine, of polyethylene or polypropylene). The correct HS code is 5607.41, which specifically identifies binder or baler twine made from polyethylene or polypropylene.
How do I classify Plastic baler twine for customs?
Plastic baler twine is classified under HS code 560741 — Twine; binder or baler twine, of polyethylene or polypropylene. This is a 6-digit subheading level code.
Does this code include twine made from natural fibers?
No, twine made from natural fibers like sisal is classified under 5607.21 if it is for binding or baling, or 5607.29 for other uses. The distinction is based on the material origin (synthetic vs. natural).
Which countries are the top exporters of plastic baler twine (HS 560741)?
In 2025, the top exporters of HS 560741 (the code used for plastic baler twine) in UN Comtrade data were Portugal ($123M, 41% of world exports), China ($34M) and Hungary ($33M). World exports came to about $303M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of plastic baler twine (HS 560741)?
In 2025, the top importers of HS 560741 (the code used for plastic baler twine) in UN Comtrade data were the United States ($46M, 17% of world imports), France ($23M) and Germany ($20M). World imports came to about $269M, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Plastic baler twine the same in all countries?
The base HS code 560741 for Plastic baler twine is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for plastic baler twine in Brazil?
In Brazil, plastic baler twine (HS 560741) is classified under NCM 5607.41.00.