Product classification
HS code for Mechanical press: 8462.62
Machine-tools, cold metal working presses, mechanical presses.
Classification of mechanical press under HS 8462.62
Mechanical presses for cold working metal are classified under HS code 8462.62. This code was specifically refined in the 2022 HS nomenclature update to better categorize machine tools. Heading 8462 covers machine-tools for working metal by forging, hammering, or die-stamping, as well as bending, folding, straightening, flattening, shearing, punching, or notching. Subheading 8462.62 specifically identifies mechanical presses. These machines utilize mechanical energy, typically through a flywheel, crankshaft, or eccentric mechanism, to apply force to a workpiece. The classification is based on the primary drive mechanism and the state of the metal being worked. If the press were used for hot working (forging), it might fall under different subheadings within 8462. The distinction between mechanical, hydraulic, and servo-driven presses is critical for correct classification under the current Harmonized System. Mechanical presses are characterized by their fixed stroke and high speed, making them suitable for high-volume stamping and blanking operations. The classification process involves verifying that the machine is designed for metalworking and that its primary force delivery is mechanical rather than fluid-driven.
- Covers
- Mechanical power presses for metal stamping
- Eccentric presses for cold metal working
- Crank presses for metal forming
- Knuckle-joint presses
- Mechanical transfer presses
- Also under 8462.62
- Schuler mechanical presses
- AIDA stamping presses
- Komatsu mechanical presses
- Seyi mechanical presses
Codes often confused with 8462.62
Common mistake. The most common misclassification occurs with HS code 8462.61, which is reserved for hydraulic presses. While both machines perform similar metal-forming tasks, the drive system is the deciding factor. Another common error is using 8462.63, which is for servo-presses. Servo-presses use a servo motor rather than a flywheel and clutch. Additionally, presses designed for working materials other than metal, such as plastics or wood, should be classified under 8477 or 8465 respectively.
Top exporters and importers of HS 846262 (the code used for mechanical press), 2025
In 2025, the largest exporter of HS 846262 (the code used for mechanical press) in UN Comtrade data was China, with 35% of world exports; the largest importer in UN Comtrade data was Vietnam, with about 11% of world imports. Mexico reports $320M of its heading 8462 imports without product detail (confidential), so its figure here may be too low and it may rank higher.
Figures cover everything classified under HS 846262, not only mechanical press.
Top exporters 2025 · share of world exports
- 1 China $495M 35% of world exports
- 2 Japan $211M 15% of world exports
- 3 South Korea $138M 9.7% of world exports
World total: $1.4B Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 Vietnam* ~$138M 11% of world imports · partner records ↗
- 2 China $131M 11% of world imports
- 3 Mexico $101M 8.1% of world imports
Mexico reports $320M of its heading 8462 imports without product detail (confidential), so its figure here may be too low and it may rank higher.
World total: $1.2B Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries marked * did not, so their figures add up what other countries recorded trading with them, and their exports are valued at buyers' CIF prices. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for mechanical press
Brazil classifies mechanical press under NCM 8462.62.00: HS 8462.62 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
Questions about mechanical press
What is the HS code for Mechanical press?
The HS code for Mechanical press is 846262 (Machine-tools; cold metal working presses, mechanical presses). The HS code for mechanical presses used for cold working metal is 8462.62.
How do I classify Mechanical press for customs?
Mechanical press is classified under HS code 846262 — Machine-tools; cold metal working presses, mechanical presses. This is a 6-digit subheading level code.
Does this code include hydraulic presses?
No, hydraulic presses are classified under HS code 8462.61. The classification depends entirely on the drive mechanism of the machine.
Which countries are the top exporters of mechanical press (HS 846262)?
In 2025, the top exporters of HS 846262 (the code used for mechanical press) in UN Comtrade data were China ($495M, 35% of world exports), Japan ($211M) and South Korea ($138M). World exports came to about $1.4B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of mechanical press (HS 846262)?
In 2025, the top importers of HS 846262 (the code used for mechanical press) in UN Comtrade data were Vietnam (about $138M, 11% of world imports), China ($131M) and Mexico ($101M). World imports came to about $1.2B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Mexico reports $320M of its heading 8462 imports without product detail (confidential), so its figure here may be too low and it may rank higher.
Is the HS code for Mechanical press the same in all countries?
The base HS code 846262 for Mechanical press is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for mechanical press in Brazil?
In Brazil, mechanical press (HS 846262) is classified under NCM 8462.62.00.