Product classification
HS code for Jack parts: 8431.10
Machinery, parts of the machinery of heading no. 8425.
Classification of jack parts under HS 8431.10
Jack parts are classified under HS code 8431.10, which specifically covers parts suitable for use solely or principally with the machinery of heading 8425. Heading 8425 includes pulley tackle and hoists, winches and capstans, and jacks. According to the General Rules of Interpretation (GRI) and the Section XVI notes, parts of lifting and handling equipment are categorized based on their primary application. Since jacks are defined as mechanical or hydraulic devices used to lift heavy loads, their components—provided they are not excluded by Note 1 to Section XVI (such as rubber seals or general-purpose hardware)—must be classified here. The classification depends on the part being identifiable as a component of a jack rather than a general-purpose item. For instance, a hydraulic cylinder specifically designed for a floor jack falls under 8431.10, whereas a standard bolt used in the assembly might be classified under 7318. This code ensures that the specialized engineering required for lifting mechanisms is recognized within the international trade nomenclature, facilitating accurate duty assessment and safety regulation compliance for heavy-duty lifting components.
- Covers
- Hydraulic jack cylinders and pistons
- Lifting arms for floor jacks
- Mechanical screw jack assemblies
- Base plates for bottle jacks
- Release valves specifically for hydraulic jacks
- Handle assemblies for trolley jacks
- Also under 8431.10
- Kito electric chain hoist parts
- Yale hand chain hoist components
- Enerpac hydraulic jack seals
- Warn winch replacement motors
Codes often confused with 8431.10
Common mistake. Jack parts are frequently misclassified under HS code 8425.42, which is the code for the complete hydraulic jack itself. Importers often fail to distinguish between the finished machinery and its individual components. Additionally, general-purpose parts like O-rings or gaskets are often incorrectly placed in 8431.10 when they should be classified by material, such as 4016.93 for vulcanized rubber. Furthermore, if the part is a motor used to power a jack, it may fall under 8501 rather than 8431.
Top exporters and importers of HS 843110 (the code used for jack parts), 2025
In 2025, the largest exporter of HS 843110 (the code used for jack parts) in UN Comtrade data was China, with 18% of world exports; the largest importer in UN Comtrade data was the United States, with 17% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 843110, not only jack parts.
Top exporters 2025 · share of world exports
- 1 China $351M 18% of world exports
- 2 United States $188M 9.6% of world exports
- 3 Germany $168M 8.6% of world exports
World total: $2.0B Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 United States $308M 17% of world imports
- 2 Germany $140M 7.8% of world imports
- 3 Netherlands $101M 5.6% of world imports
World total: $1.8B Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM codes for jack parts
Brazil splits HS 8431.10 into 2 NCM codes. Pick the one that matches your product:
- 8431.10.10Parts of hand hoists, non-electric winches, jacks
- 8431.10.90Other parts of hoists, winches and jacks
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
Questions about jack parts
What is the HS code for Jack parts?
The HS code for Jack parts is 843110 (Machinery; parts of the machinery of heading no. 8425). The primary HS code for parts of jacks is 8431.10, which covers parts for machinery of heading 8425.
How do I classify Jack parts for customs?
Jack parts is classified under HS code 843110 — Machinery; parts of the machinery of heading no. 8425. This is a 6-digit subheading level code.
Are all jack components classified here?
No, only parts that are solely or principally used for jacks are included. General hardware like nuts, bolts, and springs, or parts made of rubber or plastics, are usually classified according to their constituent material.
Which countries are the top exporters of jack parts (HS 843110)?
In 2025, the top exporters of HS 843110 (the code used for jack parts) in UN Comtrade data were China ($351M, 18% of world exports), the United States ($188M) and Germany ($168M). World exports came to about $2.0B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of jack parts (HS 843110)?
In 2025, the top importers of HS 843110 (the code used for jack parts) in UN Comtrade data were the United States ($308M, 17% of world imports), Germany ($140M) and the Netherlands ($101M). World imports came to about $1.8B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Jack parts the same in all countries?
The base HS code 843110 for Jack parts is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for jack parts in Brazil?
Brazil splits HS 843110 into 2 NCM codes, so the right one for jack parts depends on the product's details: 8431.10.10 (Parts of hand hoists, non-electric winches, jacks), 8431.10.90 (Other parts of hoists, winches and jacks).