Product classification
HS code for Cold-rolled stainless steel sheet: 7219.33
Steel, stainless, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm.
Classification of cold-rolled stainless steel sheet under HS 7219.33
Classification of cold-rolled stainless steel sheets under HS code 7219.33 is determined by the material composition, the manufacturing process, and the physical dimensions. Chapter 72 of the Harmonized System governs iron and steel, while heading 7219 specifically addresses flat-rolled products of stainless steel with a width of 600 mm or more. The subheading 7219.33 is reserved for products that have undergone cold-rolling (cold-reduction) and possess a specific thickness exceeding 1 mm but not exceeding 3 mm. This classification is precise because it distinguishes the product from hot-rolled variants and from sheets with different thickness profiles or narrower widths. The cold-rolling process involves passing the steel through rollers at room temperature, which enhances the surface finish and dimensional accuracy, characteristics that are central to the 7219.33 designation. To qualify as stainless steel, the alloy must contain at least 10.5% chromium by weight and a maximum of 1.2% carbon. These sheets are commonly used in the manufacture of kitchen appliances, medical equipment, and architectural cladding due to their corrosion resistance and aesthetic appeal.
- Covers
- Cold-reduced stainless steel sheets in coils with 2mm thickness
- Cut-to-length cold-rolled stainless steel plates (width > 600mm)
- Grade 304 or 316 stainless steel sheets within the 1mm-3mm range
- Polished or brushed stainless steel sheets for industrial use
- Stainless steel sheets with a 2B or BA finish exceeding 1mm thickness
- Also under 7219.33
- POSCO 304 2B finish sheets
- Outokumpu Core 430 sheets
- Yieh United Stainless (YUSCO) 316L sheets
- Baosteel cold-rolled stainless
Codes often confused with 7219.33
Common mistake. It is common to confuse 7219.33 with 7219.32 or 7219.34. Code 7219.32 is used for thicknesses between 3 mm and 4.75 mm, while 7219.34 is for thicknesses between 0.5 mm and 1 mm. Additionally, if the width is less than 600 mm, the product must be classified under heading 7220. Another error involves misidentifying hot-rolled steel (7219.13 or 7219.22) as cold-rolled. Hot-rolled steel typically has a rougher surface and less precise tolerances compared to the cold-rolled products of 7219.33. Proper documentation of the manufacturing method and precise thickness measurements are required to avoid these errors.
Top exporters and importers of HS 721933 (the code used for cold-rolled stainless steel sheet), 2025
In 2025, the largest exporter of HS 721933 (the code used for cold-rolled stainless steel sheet) in UN Comtrade data was China, with 14% of world exports; the largest importer in UN Comtrade data was Germany, with 15% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 721933, not only cold-rolled stainless steel sheet.
Top exporters 2025 · share of world exports
- 1 China $1.1B 14% of world exports
- 2 Indonesia $959M 13% of world exports
- 3 Finland $928M 13% of world exports
World total: $7.3B Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 Germany $1.1B 15% of world imports
- 2 China $841M 12% of world imports
- 3 Italy $728M 10.0% of world imports
World total: $7.3B Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for cold-rolled stainless steel sheet
Brazil classifies cold-rolled stainless steel sheet under NCM 7219.33.00: HS 7219.33 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
EU Regulatory Requirements
This product falls under the Carbon Border Adjustment Mechanism (CBAM). Importers to the EU must declare embedded carbon emissions and purchase CBAM certificates.
Questions about cold-rolled stainless steel sheet
What is the HS code for Cold-rolled stainless steel sheet?
The HS code for Cold-rolled stainless steel sheet is 721933 (Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm). The HS code for cold-rolled stainless steel sheet with a width of 600mm or more and a thickness between 1mm and 3mm is 7219.33.
How do I classify Cold-rolled stainless steel sheet for customs?
Cold-rolled stainless steel sheet is classified under HS code 721933 — Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm. This is a 6-digit subheading level code.
Does this code include coated or plated stainless steel?
Yes, provided the primary classification remains flat-rolled stainless steel of the specified dimensions and the coating does not change the essential character of the steel to a different heading. However, most standard 7219.33 products are uncoated or only surface-treated.
Which countries are the top exporters of cold-rolled stainless steel sheet (HS 721933)?
In 2025, the top exporters of HS 721933 (the code used for cold-rolled stainless steel sheet) in UN Comtrade data were China ($1.1B, 14% of world exports), Indonesia ($959M) and Finland ($928M). World exports came to about $7.3B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of cold-rolled stainless steel sheet (HS 721933)?
In 2025, the top importers of HS 721933 (the code used for cold-rolled stainless steel sheet) in UN Comtrade data were Germany ($1.1B, 15% of world imports), China ($841M) and Italy ($728M). World imports came to about $7.3B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Cold-rolled stainless steel sheet the same in all countries?
The base HS code 721933 for Cold-rolled stainless steel sheet is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for cold-rolled stainless steel sheet in Brazil?
In Brazil, cold-rolled stainless steel sheet (HS 721933) is classified under NCM 7219.33.00.