Product classification
HS code for Artificial stone tiles: 6810.19
Cement, concrete or artificial stone, tiles, flagstones and similar, (excluding building blocks and bricks) whether or not reinforced.
Classification of artificial stone tiles under HS 6810.19
Artificial stone tiles are classified under HS code 6810.19. This code is situated within Chapter 68, which covers articles of stone, plaster, cement, and similar materials. Heading 6810 is dedicated to articles of cement, concrete, or artificial stone. Within this heading, the 6810.1x series specifically addresses tiles, flagstones, bricks, and similar articles. Subheading 6810.11 is for building blocks and bricks, while 6810.19 is the residual category for other flat-surfaced items like floor and wall tiles. Artificial stone is created by binding crushed natural stone or mineral fillers with a binder, such as polyester resin or cement. The classification is determined by the physical form of the product (a tile or flagstone) and its material composition. Unlike natural stone tiles, which are classified in heading 6802, these are manufactured or "engineered" products. The distinction is vital for customs as it reflects the manufacturing value-add. These tiles are widely used in modern construction for flooring and wall cladding due to their uniformity and durability.
- Covers
- Agglomerated quartz floor tiles
- Terrazzo tiles made of cement and stone chips
- Artificial marble wall tiles
- Paving stones made of concrete or artificial stone
- Flagstones for outdoor landscaping
- Engineered stone tiles for bathroom cladding
- Also under 6810.19
- Belgard (pavers)
- CEMEX (decorative concrete)
- Marazzi (concrete-look tiles)
- MSI Surfaces (various stone/tile products)
Codes often confused with 6810.19
Common mistake. The most frequent misclassification occurs with HS code 6907, which covers ceramic tiles. While they may look similar, ceramic tiles are made of fired clay, whereas 6810 tiles are made of stone aggregates and binders. Another error is using 6802.21 or 6802.91, which are for natural marble or limestone tiles. If the product is not cut directly from a single block of natural stone, it cannot be in 6802. Additionally, 6810.99 is sometimes used incorrectly for tiles, but 6810.19 is more specific and takes precedence under GRI 3(a).
Top exporters and importers of HS 681019 (the code used for artificial stone tiles), 2025
In 2025, the largest exporter of HS 681019 (the code used for artificial stone tiles) in UN Comtrade data was China, with 37% of world exports; the largest importer in UN Comtrade data was the United Kingdom, with 8.2% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Figures cover everything classified under HS 681019, not only artificial stone tiles.
Top exporters 2025 · share of world exports
- 1 China $867M 37% of world exports
- 2 India $175M 7.5% of world exports
- 3 Thailand $169M 7.2% of world exports
World total: $2.3B Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 United Kingdom $124M 8.2% of world imports
- 2 United States $81M 5.4% of world imports
- 3 Netherlands $80M 5.3% of world imports
World total: $1.5B Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for artificial stone tiles
Brazil classifies artificial stone tiles under NCM 6810.19.00: HS 6810.19 with 00 added.
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text on each NCM page is the official one.
Questions about artificial stone tiles
What is the HS code for Artificial stone tiles?
The HS code for Artificial stone tiles is 681019 (Cement, concrete or artificial stone; tiles, flagstones and similar, (excluding building blocks and bricks) whether or not reinforced). The specific HS code for artificial stone tiles and flagstones is 6810.19.
How do I classify Artificial stone tiles for customs?
Artificial stone tiles is classified under HS code 681019 — Cement, concrete or artificial stone; tiles, flagstones and similar, (excluding building blocks and bricks) whether or not reinforced. This is a 6-digit subheading level code.
Are these the same as ceramic tiles?
No, ceramic tiles are classified under Chapter 69 (6907) and are made from clay fired at high temperatures, while artificial stone tiles are made from stone fragments and binders.
Which countries are the top exporters of artificial stone tiles (HS 681019)?
In 2025, the top exporters of HS 681019 (the code used for artificial stone tiles) in UN Comtrade data were China ($867M, 37% of world exports), India ($175M) and Thailand ($169M). World exports came to about $2.3B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of artificial stone tiles (HS 681019)?
In 2025, the top importers of HS 681019 (the code used for artificial stone tiles) in UN Comtrade data were the United Kingdom ($124M, 8.2% of world imports), the United States ($81M) and the Netherlands ($80M). World imports came to about $1.5B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Is the HS code for Artificial stone tiles the same in all countries?
The base HS code 681019 for Artificial stone tiles is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.
What is the NCM code for artificial stone tiles in Brazil?
In Brazil, artificial stone tiles (HS 681019) is classified under NCM 6810.19.00.