HS code · 6-digit subheading
HS Code 7019.11 – Glass fibres; (including glass wool), chopped strands, of a length of not more than 50mm
HS code 7019.11 is the 6-digit subheading for glass fibres, (including glass wool), chopped strands, of a length of not more than 50mm. It is used for chopped strand mat reinforcement, thermoplastic reinforcement fibers, friction material additives, filter media components and gypsum board reinforcement.
What HS 7019.11 covers
This specific classification covers glass fibers, including glass wool, that have been cut into short segments, not exceeding 50 millimeters in length. These chopped strands are crucial intermediate products in various manufacturing processes, valued for their reinforcing properties, heat resistance, and chemical inertness. They are widely used to enhance the strength and durability of other materials. Importers are typically manufacturers of plastics, composites, insulation materials, friction materials, and specialized papers, where these fibers provide structural integrity or thermal performance. Exporters are large-scale glass fiber producers with advanced cutting and sizing capabilities. Key considerations include fiber diameter, the specific sizing (surface treatment) applied for resin compatibility, and the consistency of length, which directly impact the performance of the final composite or product.
- Covers
- Chopped strand mat reinforcement
- Thermoplastic reinforcement fibers
- Friction material additives
- Filter media components
- Gypsum board reinforcement
- Concrete reinforcement fibers
- Insulation filler
- Examples
- Owens Corning chopped strands
- Jushi chopped strands
- PPG Fiber Glass chopped strands
- Saint-Gobain Vetrotex chopped strands
Codes often confused with 7019.11
Common mistake. Can be confused with 701912 (rovings) or 701913 (yarns) if the length or form factor is not precisely defined. Also, 6806 (mineral wool) if the 'glass wool' aspect is emphasized without clear distinction of fiber form.
Top exporters and importers of HS code 701911, 2025
In 2025, the largest exporter of HS code 701911 in UN Comtrade data was Malaysia, with 21% of world exports; the largest importer in UN Comtrade data was Germany, with 22% of world imports. Countries that did not report 2025 data are estimated from partner records, which can understate them.
Top exporters 2025 · share of world exports
- 1 Malaysia $264M 21% of world exports
- 2 China $237M 19% of world exports
- 3 Belgium $224M 18% of world exports
World total: $1.2B Reported figures on UN Comtrade ↗
Top importers 2025 · share of world imports
- 1 Germany $268M 22% of world imports
- 2 United States $114M 9.3% of world imports
- 3 Italy $100M 8.2% of world imports
World total: $1.2B Reported figures on UN Comtrade ↗
How these figures are built
109 countries reported 2025 trade to UN Comtrade in HS 2022, and their own totals are used. Countries that did not report are estimated from what other countries recorded trading with them. Those estimates miss trade with other non-reporting countries, so they can be low, and a non-reporting country can rank higher than shown or be missing from the list. World totals add both and leave out trade between two non-reporting countries. Figures are in current US dollars; reported imports are mostly valued CIF and exports FOB, and exports include re-exports. The UN Comtrade links show the underlying records; they can also list a few reporters left out here (regional groups and older HS editions).
Source: UN Comtrade (United Nations Statistics Division), 2025 annual data.
Brazil NCM code for 7019.11
Brazil does not split HS 7019.11: its NCM code is 7019.11.00.
All Brazil NCM codes in heading 70.19 →
Source: Siscomex NCM table, updated Oct 2026. The Portuguese text is official; the English is our translation.
Questions about HS 7019.11
What is HS code 701911?
HS code 701911 is a 6-digit subheading in the Harmonized System that covers: Glass fibres; (including glass wool), chopped strands, of a length of not more than 50mm. This specific classification covers glass fibers, including glass wool, that have been cut into short segments, not exceeding 50 millimeters in length. These chopped strands are crucial intermediate products in various manufacturing processes, valued for their reinforcing properties, heat resistance, and chemical inertness. They are widely used to enhance the strength and durability of other materials. Importers are typically manufacturers of plastics, composites, insulation materials, friction materials, and specialized papers, where these fibers provide structural integrity or thermal performance. Exporters are large-scale glass fiber producers with advanced cutting and sizing capabilities. Key considerations include fiber diameter, the specific sizing (surface treatment) applied for resin compatibility, and the consistency of length, which directly impact the performance of the final composite or product.
What products fall under HS code 701911?
Chopped strand mat reinforcement, thermoplastic reinforcement fibers, friction material additives, filter media components, gypsum board reinforcement, concrete reinforcement fibers, insulation filler
What are common misclassifications for HS code 701911?
Can be confused with 701912 (rovings) or 701913 (yarns) if the length or form factor is not precisely defined. Also, 6806 (mineral wool) if the 'glass wool' aspect is emphasized without clear distinction of fiber form.
Which countries are the top exporters of goods under HS code 701911?
In 2025, the top exporters of HS code 701911 in UN Comtrade data were Malaysia ($264M, 21% of world exports), China ($237M) and Belgium ($224M). World exports came to about $1.2B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
Which countries are the top importers of goods under HS code 701911?
In 2025, the top importers of HS code 701911 in UN Comtrade data were Germany ($268M, 22% of world imports), the United States ($114M) and Italy ($100M). World imports came to about $1.2B, adding countries' reported figures and partner-based estimates for those that did not report (UN Comtrade data). Countries that did not report 2025 data are estimated from partner records, which can understate them.
How is HS code 701911 structured?
HS code 701911 is a 6-digit subheading under the Harmonized System. The first 2 digits (70) identify the chapter, digits 3-4 (19) identify the heading, and digits 5-6 (11) specify the subheading. This code is standardized globally by the World Customs Organization.
What is the Brazil NCM code for HS code 701911?
In Brazil, HS code 701911 is NCM 7019.11.00. The last two digits are 00 because Brazil does not split this HS code further.