HS Code for Rubber hose with fittings

The classification of rubber hoses with fittings under HS code 4009.32 is determined by the General Rules of Interpretation (GRI), specifically focusing on the material composition and the structural reinforcement of the tubing. Heading 4009 is dedicated to tubes, pipes, and hoses of vulcanized rubber other than hard rubber. Within this heading, the code is further subdivided based on the presence of reinforcement materials and whether the product is equipped with fittings. Subheading 4009.32 specifically identifies hoses that are reinforced or otherwise combined only with textile materials and are presented with fittings attached. The textile reinforcement typically consists of braided or woven synthetic or natural fibers embedded within the rubber walls to provide pressure resistance while maintaining flexibility. The presence of fittings—such as couplings, flanges, or connectors—is a critical factor, as it distinguishes this code from 4009.31, which covers similar hoses without fittings.

Products Included

• Textile-reinforced hydraulic hoses with attached metal connectors
• Air brake hoses with permanent couplings for heavy vehicles
• Fuel delivery lines reinforced with nylon braid and end fittings
• Water discharge hoses with integrated plastic or metal nozzles
• Pneumatic tool hoses with quick-connect fittings

Common Misclassification

This code is frequently confused with 4009.12, 4009.22, and 4009.42. The distinction lies entirely in the reinforcement material. Code 4009.12 is for hoses without any reinforcement, while 4009.22 is for those reinforced with metal. Code 4009.42 is used for hoses reinforced with materials other than metal or textiles, such as glass fiber or carbon fiber. Additionally, if the hose is made of hard rubber (ebonite), it must be classified under heading 4017.

FAQ

What is the HS code for Rubber hose with fittings?

The HS code for vulcanized rubber hoses reinforced only with textile materials and equipped with fittings is 4009.32.

Can these hoses be used for high-pressure steam?

While 4009.32 covers the physical construction, the suitability for steam depends on the specific rubber compound. However, if the hose meets the textile reinforcement and fitting criteria, 4009.32 remains the correct classification regardless of the fluid conveyed.