HS Code for Hot-rolled stainless steel coil

The classification of hot-rolled stainless steel coil under HS code 7219.12 is highly specific, relying on the material's chemistry, width, and precise thickness. Stainless steel is defined as alloy steel containing 10.5% or more chromium by weight. This code applies to flat-rolled products with a width of 600mm or more. The "hot-rolled" and "in coils" descriptors are mandatory. Most importantly, 7219.12 is restricted to products with a thickness of at least 4.75mm but not exceeding 10mm. This narrow window is crucial because the 7219 heading is subdivided into multiple codes based solely on thickness increments. For example, material thicker than 10mm falls under 7219.11, while material thinner than 4.75mm falls under 7219.13. This level of granularity in the Harmonized System reflects the different industrial uses and market values of stainless steel at varying gauges. Importers must provide precise thickness measurements and chemical analysis to justify classification under this specific subheading, as it is often subject to different anti-dumping duties than thinner or thicker variants.

Products Included

• Hot-rolled stainless steel coils (4.75mm - 10mm thickness)
• Grade 304/316 stainless steel coils (hot-rolled)
• Stainless steel wide strip in coils (medium gauge)
• Hot-rolled stainless steel bands (width >= 600mm)

Common Misclassification

Misclassification often occurs between 7219.12 and its neighboring codes, 7219.11 (thickness > 10mm) and 7219.13 (thickness 3mm to 4.75mm). A measurement error of 0.1mm can lead to an incorrect code. Furthermore, if the stainless steel is cold-rolled rather than hot-rolled, it must be classified under subheadings 7219.31 through 7219.35. If the width is less than 600mm, heading 7220 applies.

FAQ

What is the HS code for hot-rolled stainless steel coil (4.75-10mm)?

The specific HS code for hot-rolled stainless steel coil with a thickness between 4.75mm and 10mm is 7219.12.

Why is thickness so important for HS 7219?

The Harmonized System uses thickness to differentiate between stainless steel products because gauge significantly affects the manufacturing cost and the end-use application.