Products
Product Classification Guide

HS Code for Flagstones

6801.00 Stone; setts, curbstones and flagstones, of natural stone (except slate)
View full HS code details

Flagstones are classified under HS code 6801.00 because they represent natural stone that has been shaped for use in paving, curbing, or as setts, but has not undergone the extensive working, such as polishing or intricate carving, that would categorize it under heading 68.02. This classification is governed by the General Rules of Interpretation (GRI) 1, which dictates that classification is determined by the terms of the headings and any relative section or chapter notes. Chapter 68 specifically addresses articles of stone, plaster, cement, asbestos, mica, or similar materials. Heading 68.01 is reserved for setts, curbstones, and flagstones of natural stone, excluding slate. The exclusion of slate is critical, as slate products are specifically directed to heading 68.03. For a product to fall under 6801.00, it must be intended for use in road or pathway surfacing and typically possesses a relatively rough finish compared to decorative building stone. The stone must be of a type used for paving, and the dimensions usually involve a flat surface suitable for walking or driving.

Products Included

  • Granite flagstones for walkways
  • Sandstone paving slabs
  • Limestone setts for driveways
  • Natural stone curbstones
  • Porphyry paving blocks

Common Misclassification

Flagstones are frequently misclassified under HS code 6802, which covers worked monumental or building stone. The distinction lies in the level of processing and the intended use; 6801 is specifically for paving and curbing. Additionally, any flagstone made of slate must be classified under 6803.00, as Chapter 68 notes explicitly exclude slate from heading 68.01.

FAQ

What is the HS code for flagstones?

The HS code for flagstones made of natural stone (excluding slate) is 6801.00.

What is the difference between HS 6801 and HS 6802?

HS 6801 is reserved for stone used for paving, curbing, and setts, whereas HS 6802 covers stone that has been further worked for use in monuments or buildings, such as polished marble slabs or carved granite blocks.

Frequently Asked Questions

What is the HS code for Flagstones?

The HS code for Flagstones is 680100 (Stone; setts, curbstones and flagstones, of natural stone (except slate)).

How do I classify Flagstones for customs?

Flagstones is classified under HS code 680100 — Stone; setts, curbstones and flagstones, of natural stone (except slate). This is a 6-digit subheading level code.

Is the HS code for Flagstones the same in all countries?

The base HS code 680100 for Flagstones is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.