HS Code for Electro-galvanized alloy steel sheet
HS code 7225.91 applies to flat-rolled products of other alloy steel, with a width of 600 mm or more, that have been electrolytically plated or coated with zinc. This classification falls under Chapter 72 (Iron and Steel). To qualify for this code, the steel must meet the definition of \"other alloy steel\" as provided in Note 1(f) to Chapter 72, which specifies minimum percentages of elements like aluminum, boron, chromium, or manganese. The \"electro-galvanized\" aspect refers to the electrolytic process where a layer of zinc is bonded to the steel to prevent corrosion. This process results in a thinner, more uniform coating compared to hot-dip galvanizing, making it ideal for applications requiring a high-quality surface finish. The width requirement of 600 mm or more is a standard threshold in the HS to distinguish between \"wide\" sheets and \"narrow\" strips. This material is frequently used in the automotive industry for body panels where both corrosion resistance and paintability are essential.
Products Included
- Electro-galvanized alloy steel coils (width >600mm)
- Zinc-plated alloy steel sheets
- Electrolytically coated high-strength alloy steel
- Alloy steel flat-rolled products with zinc coating
- Automotive grade electro-galvanized alloy sheets
Common Misclassification
The most common misclassification is HS code 7210.30, which is for electro-galvanized non-alloy steel. The distinction depends entirely on the chemical composition of the steel base. If the steel contains alloying elements above the thresholds defined in Chapter 72, it must be moved to 7225.91. Another error is 7226.99, which applies to alloy steel with a width of less than 600 mm. Importers must provide mill test certificates to prove the alloy content and width.
FAQ
What is the HS code for Electro-galvanized alloy steel sheet?
The HS code for electro-galvanized alloy steel sheets with a width of 600 mm or more is 7225.91.
How does 7225.91 differ from hot-dip galvanized steel?
Hot-dip galvanized alloy steel is classified under 7225.92. The 7225.91 code is strictly for the electrolytic (electro-galvanized) coating process.
Industry
Frequently Asked Questions
What is the HS code for Electro-galvanized alloy steel sheet?
The HS code for Electro-galvanized alloy steel sheet is 722591 (Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc).
How do I classify Electro-galvanized alloy steel sheet for customs?
Electro-galvanized alloy steel sheet is classified under HS code 722591 — Steel, alloy; flat-rolled, width 600mm or more, n.e.c. in heading no. 7225, electrolytically plated or coated with zinc. This is a 6-digit subheading level code.
Is the HS code for Electro-galvanized alloy steel sheet the same in all countries?
The base HS code 722591 for Electro-galvanized alloy steel sheet is internationally standardized for the first 6 digits across 200+ countries. Individual countries may add additional digits for national tariff lines and specific classifications.