HS Code for Diamond dust

Diamond dust is classified under HS code 7105.10 because it consists of fine particles or powder derived from natural or synthetic diamonds. According to the Harmonized System, Chapter 71 encompasses precious and semi-precious stones, precious metals, and articles thereof. Specifically, heading 7105 is reserved for dust and powder of natural or synthetic precious or semi-precious stones. The classification is determined by the physical state of the diamond material; while whole diamonds fall under 7102 or 7104, the pulverized form is strictly categorized here. This classification applies regardless of whether the dust is used for industrial abrasive purposes or in the manufacture of jewelry polishing compounds. The material must generally pass through a sieve with a mesh aperture of 0.5 mm to be considered dust or powder in this context. The distinction between natural and synthetic diamond dust is maintained at the subheading level, with 7105.10 specifically covering diamond-based powders, whereas 7105.90 covers powders of other precious stones like rubies or sapphires.

Products Included

• Natural diamond powder
• Synthetic diamond dust
• Industrial grade diamond grit
• Micro-sized diamond particles for polishing
• Diamond dust for abrasive pastes

Common Misclassification

Diamond dust is frequently misclassified under HS code 7102, which is reserved for whole or worked diamonds that are not yet in powder form. Another common error is using HS code 7104, which covers synthetic or reconstructed precious stones in larger forms. Additionally, some importers mistakenly use HS code 2513, which covers pumice stone and other natural abrasives, but diamond-based materials must remain in Chapter 71 due to their status as precious stones.

FAQ

What is the HS code for Diamond dust?

The HS code for diamond dust, whether natural or synthetic, is 7105.10.

Does the size of the particles affect the HS code?

Yes, the material must be in the form of dust or powder. If the diamond particles are large enough to be considered stones (even industrial ones), they may fall under 7102 or 7104 instead of 7105.